Staticworx® SD Rubber Series
Rubber Tile
 Staticworx® SD Rubber Series
Staticworx® SD Rubber Flooring – Static control and aesthetically pleasing don’t have to be mutually exclusive properties. SD is available in ten attractive colors and special Expanded Colors are available, giving architects and designers even more choices of this visually attractive static control floor. This static dissipative style is ideal for use in engineering offices, data centers, server rooms, labs, access flooring installations and emergency call centers. Like all Staticworx® rubber, SD rubber flooring exceeds the ADA slip resistance requirements.
Not recommended For Class Zero, Munitions, Explosives and Ordnance applications
Staticworx® recommends EC rubber for these applications.
Test Methods and Results for SD Rubber
■ ESD STM 97.2- (Voltage Generation of
Flooring in Combination with a person)
■ Industry Standard Heel Straps with
1meg-ohm resistor, utilized for
evaluation.
■ All materials (Flooring, Heel Straps)
were conditioned at 12% RH for 72
hours before
test
■ Test completed in 12% RH condition
■ The maximum and minimum absolute
values from each test is reported
Compliance with ANSI/ESD S20.20-2007
This standard stresses the importance of
two test methods when evaluating ESD
Control Flooring:
Voltage Measurement on a Person -
ANSI/ESD S20.20 suggests that your floor
should not generate more than 100 volts
on a person's body. Staticworx® SD Rubber Flooring will not generate more
than 10 volts on a person's body. (In
conjunction with conductive footwear,
using ESD STM 97.2) Resistance Measurement in Combination
with a Person - This test method takes into
account the person and their footwear.
Test results show that Staticworx® static
dissipative rubber flooring measures
below the ANSI/ESD S20.20
recommended limit of 35 meg-ohms to
ground (using ESD STM 97.1)
Thickness: 2.0 mm
Tile Size Available: 24 x 24 inches
Roll Size Available: 49.2' x 48"
Electrical Properties: ESD S7.1\ASTM F-150
RH >30% at room temperature
Dissipative: 106 < 109
■ Static dissipative.
■ 5 year limited
wear warranty.
■ 10 year limited
conductivity warranty.
■ 3 colors available for
access floor panels.
■ 10 colorways in multicolor
chip pattern
About Maintenance:
The advantage of the non-porous surface,
of Staticworx® rubber floor coverings, combined
with a ”StainBlock“ high density surface
permits easy and inexpensive cleaning.
The extremely hard wearing surface of
Staticworx® rubber floor coverings offer a whole series
of advantages in care and maintenance
Adhesive Information:
|
ESD Rubber Tile ESD Vinyl Tile ESD Carpet Tile ESD Epoxy Adhesives Static Flooring Maintenance Request Project Information Request a Sample 
