ESD Rubber Tile: Maintenance

(continued from prior page)

Architectural Rubber Maintenance Instructions... continued

Regular Maintenance

Floors subject to heavier traffic will require more frequent interim care than low traffic areas.

Daily Maintenance

1. Sweep with a clean broom or brush to remove dust and dirt.

2. To remove light soils, spot clean with a neutral pH cleaner such as Taski “Profi” (1-2 oz./gal).

Interim Maintenance (1-5 times a week)

1. Sweep with a clean broom or brush to remove dust and dirt.

2. To remove light soils, spot clean with a neutral pH cleaner such as Taski “Profi” (1-2 oz./gal.)

3a. For hammered surface: dry buff floor with single disc rotary buffing machine and soft nylon brush or white pad (not to exceed 300 rpm).

3b. For round surface: dry buff floor with single disc rotary buffing machine and soft nylon brush only (not to exceed 300 rpm).

Stain Removal

Most stains can be removed with common solvents. Cigarette or tar residue can be removed with a tar remover or lighter fluid and a nylon scouring pad. Remove all cleaning solvents.

To remove dried iodine-based spills such as Betadine, use a cleaner such as Butcher’s “Speedball 2000.”

Scuffs and black heel marks, can be easily removed by spot cleaning with a neutral pH cleaner such as Taski “Profi” (1-2 oz./gal).

Waxes/High Shine

All Staticworx® ESD Rubber Flooring features a built in dirtrepellent, which makes it unnecessary to apply wax coatings to protect the floor. Wax coatings are not recommended for antistatic flooring.

Questions/Assistance

For questions or assistance, please contact ESDTile.com Customer Service at (617) 923-2000, Monday-Friday between 8:30 am and 5:00 pm EST.

Page 1 // Page 2