Ammunitions and Explosives
The handling and manufacture of ammunition and explosives requires different static protection procedures than those for handling electronic devices.
The Department of Defense (DoD) manual 4145.26-M, The Contractor’s Safety Manual for Ammunition and Explosives, deals with this kind of work. This document was modified on March 13, 2008, and a change incorporated on August 31, 2018.
You can click here to view section 6.4 from The Contractor’s Safety Manual for Ammunition and Explosives (4145.26M) covering static electricity and Grounding.
Here are the essential properties required from a grounded conductive floor used in ammunition and explosives applications:
The maximum resistance of a body, plus the resistance of the conductive shoes, plus the resistance of the conductive floor to the ground system shall not exceed 1,000,000 ohms total. (R1 (body) + R2 (shoes) + R3 to ground (Floor ) < 1 million ohms.)
Example: if the floor’s resistance to ground is 500,000 ohms then the sum of the resistance of the body plus the resistance of the shoes must be below 500,000 ohms or the total allowable resistance limit of 1,000,000 ohms would be exceeded.
StaticWorx ESD EC Rubber flooring meets the ESD requirements of DoD 4145.26-M.
Additionally, StaticWorx ESD Vinyl Tile may be an appropriate flooring choice for a munitions, or energetic materials, area. ESD Vinyl Tile is specified in this government spec.
The maximum resistance of a body, plus the resistance of the conductive shoes, plus the resistance of the conductive floor to the ground system shall not exceed 1,000,000 ohms total. (R1 (body) + R2 (shoes) + R3 to ground (Floor ) < 1 million ohms.)
Example: if the floor’s resistance to ground is 500,000 ohms then the sum of the resistance of the body plus the resistance of the shoes must be below 500,000 ohms or the total allowable resistance limit of 1,000,000 ohms would be exceeded.
StaticWorx ESD EC Rubber flooring meets the ESD requirements of DoD 4145.26-M.
Additionally, StaticWorx ESD Vinyl Tile may be an appropriate flooring choice for a munitions, or energetic materials, area. ESD Vinyl Tile is specified in this government spec.
Other applications can include:
Engineering labs, government data centers (National Archives, IRS, SSA, NSA, FBI, etc.), war rooms, communications centers and military base electronics labs.
Click here for OSHA Regulations (Standards – 29 CFR), “Explosives and blasting agents. – 1910.109”
Purchasing
Government personnel can buy direct from StaticWorx:
Call 617-923-2000
Email: Kimberly Petraccaro, Director of Government Relations.
Get in Touch
The form below will help us better understand your needs and get you as quickly as possible to the right person. We look forward to helping you solve your static problem!
You can expect a response within 24 hours. For faster service, please give us a call: 617-923-2000
Visit our privacy policy to find out how we process data.
StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.
