StatBond™ Pressure-Sensitive (PS) Conductive Adhesive

StatBond Pressure-Sensitive adhesive enables the most efficient and
cost-effective ESD installation labor in the industry.

StatBond™ Pressure-Sensitive (PS) Conductive Adhesive

StatBond Pressure-Sensitive adhesive enables the most efficient and
cost-effective ESD installation labor in the industry.

Installing StatBond Pressure-Sensitive Conductive adhesive


StatBond PS conductive pressure-sensitive adhesive – the latest entry in our line of high-performance conductive adhesives – was developed to fill a void in the ESD flooring industry. Traditionally, wet-set carbon black and dark graphite adhesives have been used to install vinyl and rubber tiles. Wet-set adhesives are troweled on the floor and the tile placed while the adhesive is wet, resulting in slow, messy installations.

When the floor is rolled, these dark wet-adhesives often seep through the seams. To contain the mess, the installer must clean the tiles with solvents and mineral spirits before the adhesive has dried. Once the adhesive has dried, it’s very difficult to remove and can stain the tiles.

StatBond PS can be spread over a large area and allowed to dry before tiles are installed. Because it’s dry, there’s no chance of the adhesive oozing into seams when the floor is rolled. This means no mess, a much faster installation, and quick, easy cleanup.

Tighter Installation

Working on a dry pressure-sensitive adhesive enables the installer to employ the pyramid/step installation method for large areas. This method reduces the possibility of variance and cutbacks common to jobs where the tile was installed in rows. It also helps prevent gaps because the geometry of fitting tiles into a pyramid (instead of linear rows) forces the tiles to fit together tightly.

A gap-free installation yields a cleaner facility – because there are no seams to trap dirt and other contaminates.

A pyramid style installation of ESD Tile installed with
GroundTack as seen in the video

Installing ESD vinyl with StatBond Pressure-Sensitive Adhesive

Permanent Conductivity

StatBond PS conductive adhesive designed for rubber and vinyl tile: Used under ESD rubber or vinyl, StatBond PS provides a permanent conductive bond.

Key Benefits

25 pound weight held in place with StatBond Pressure Sensitive Adhesive

Environmental Impact

Indoor Air Quality Certified to SCS-EC10.3-2014 v3.0 
Conforms to the CDPH/EHLB Standard Method v1.1-2010 (effective January 1, 2012) for the school classroom, private office, and single-family residence parameters when modeled as Flooring. Also, conforms to the SCAQMD Rule 1168 – Adhesive and Sealants (January 2005); Hong Kong Air Pollution Control (VOC) Regulation.

Note: GroundTack Releasable Adhesive is made for use with ShadowFX ESD Carpet tile.

Available in 1- and 4-gallon pails.

Play Video

StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.

Play Video

StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.

Flooring Products

We accept these major credit cards.

The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.

Share This

Share on twitter
Share on linkedin
Share on facebook
Share on email
Share on whatsapp

Get in Touch

East Coast: 617-923-2000
Email: [email protected]

“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”

subscribe to newsletter

Sign up for our newsletter and occasional updates.

Learning Center

Share This

Share on twitter
Share on linkedin
Share on facebook
Share on email
Share on whatsapp

Get in Touch

East Coast: 617-923-2000
Email: [email protected]

“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”

subscribe to newsletter

Sign up for our newsletter and occasional updates.

The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.

Flooring Products

We accept these major credit cards.

The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.

Share This

Share on twitter
Share on linkedin
Share on facebook
Share on email
Share on whatsapp

Get in Touch

East Coast: 617-923-2000
Email: [email protected]

“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”

subscribe to newsletter

Sign up for our newsletter and occasional updates.

Learning Center