GroundBridge Grounding System
for Floating Floor Installations

FAST, GLUELESS, ESD-SAFE INSTALLATIONS OVER ANY EXISTING SUBFLOOR

Convert any hard surface floor into a static control floor. Simply roll out GroundBridge strips, a lightweight material composed of conductive cellulose. Create a floating floor by joining the corners of ShadowFX carpet tiles using dimensionally-strong, self-adhering TacTiles®. Done. No glue. No trowels. No mess.

Ideal for floating floors: ShadowFX carpet tile, EclipseGF (glue free) conductive rubber, and GroundLock and StatLock Interlocking Tiles

Kovara® Moisture Protection

Formerly VersaShield

Moisture barrier – protection for flooring materials and adhesives against moisture and relative humidity

Kovara moisture barrier is laid above concrete floor slabs and below floor coverings to protect concrete, flooring materials and adhesives from staining, warping or mold that may result from water vapor emissions and alkaline salts infiltrating through the concrete slab.

A three-layer composite construction, Kovara has an HDPE bottom layer for moisture protection, glass mat middle layer for dimensional stability, and gray mineral top layer to enhance adhesive bond.

Play Video

Interface TacTiles

With TacTiles, you install ESD Tiles over your existing floor without permanent adhesion. TacTiles adhere tiles to one another, creating a “floating floor” – making for easy installation, removal and replacement, giving you dimensional strength with individual flexibility.

With non-releasable full-spread glues, tiles are permanently stuck to the floor, requiring removal of old tiles when it’s time to replace. This may damage the substrate beneath, leaving battle scars no floor should endure. Not to mention, it doesn’t give you the freedom and control that a glue-free modular floor can provide.

Because TacTiles contain no liquid components, they virtually eliminate the issue of VOCs (Volatile Organic Compounds). So they can be installed almost anywhere at anytime –making installation convenient for you.

Copper Grounding Strips

Copper strips link the ESD flooring installation to earth ground. 12” copper strips are placed at the periphery of the room under the conductive ground plane – conductive adhesive or GroundBridge underlayment – and connected to an earth ground such as an outlet or bus bar. Charges drain through the ESD flooring material to the conductive ground plane, cross the ground plane and are carried via copper strips to earth ground.

One 12” strip per 1000 feet of ESD flooring.

GroundLock™ Extreme Aluminum
Edge Reducer, 3" x 36"

Dead Blow Hammer
for installing GroundLock Extreme

Square-Scrub Pivot Machine

for resurfacing non-ESD floors with GroundWorx permanent ESD coatings

Our Square-Scrub Pivot machines feature a pivoting head for balanced contact & easy control. The pivoting head releases the control handle from the bottom of the base, allowing the machine to pivot freely front to back to follow uneven floors more efficiently. The floating design gives the head near perfect front-to-back and side-to-side weight distribution, allowing the entire pad to make equal contact with the floor providing equal distribution of work across the entire pad. Features a sleek 7-gauge stainless steel base, the Square Scrub Pivot can handle the toughest of floor preparation jobs including: tile & grout, VCT wet or dry, wood floors, stone care, and more.

Available with 20” or 28” head.

Bullet Cutter – Soft Flooring Shear

Available for Loan when installing StaticWorx Groundlock Extreme Interlocking Tiles

The Bullet EZ Soft Flooring Shear is a versatile, professional-grade flooring shear designed to cut carpet tiles, LVT and VCT and more – up to 1” thick and 26” wide. It can cut square, factory-clean edge at 45- and 90-degree angles. Features a built-in ruler for accurate cuts, an adjustable fence and built-in self-measuring wall gauge so your flooring fits perfectly into place. An integrated caster system allows you to roll the shear around your job site and cut where you work.

One-year warranty. Made in the USA with Global materials.

This rugged, high-quality, portable bullet cutter is designed for flooring professionals. Also available for DIY installations through our StaticWorx loaner program.

Kovara moisture barrier is laid above concrete floor slabs and below floor coverings to protect concrete, flooring materials and adhesives from staining, warping or mold that may result from water vapor emissions and alkaline salts infiltrating through the concrete slab.

A three-layer composite construction, Kovara has an HDPE bottom layer for moisture protection, glass mat middle layer for dimensional stability, and gray mineral top layer to enhance adhesive bond.

StaticWorx Flooring Products

Play Video

StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.

Play Video

StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.

Flooring Products

We accept these major credit cards.

The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.

Share This

Share on twitter
Share on linkedin
Share on facebook
Share on email
Share on whatsapp

Get in Touch

East Coast: 617-923-2000
Email: [email protected]

“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”

subscribe to newsletter

Sign up for our newsletter and occasional updates.

Learning Center

Share This

Share on twitter
Share on linkedin
Share on facebook
Share on email
Share on whatsapp

Get in Touch

East Coast: 617-923-2000
Email: [email protected]

“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”

subscribe to newsletter

Sign up for our newsletter and occasional updates.

The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.

Flooring Products

We accept these major credit cards.

The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.

Share This

Share on twitter
Share on linkedin
Share on facebook
Share on email
Share on whatsapp

Get in Touch

East Coast: 617-923-2000
Email: [email protected]

“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”

subscribe to newsletter

Sign up for our newsletter and occasional updates.

Learning Center