Data Center Flooring: ESD Floors Save Money & Reduce Energy Consumption

Data Centers use roughly three percent of all electricity generated on the planet.

According to the article “Improving Data Center Power Consumption and Energy Efficiency,” by Senior Vice President of Engineering and Chief Technology Officer, Ali Marashi – on a global scale, data center power consumption amounts to about 416 terawatts – or roughly three percent of all electricity generated on the planet. 

That’s a lot of electricity.

It is estimated that 43% of the energy consumed by data centers is used for cooling and power provision systems. Data centers require cooling to offset heat generated by operational equipment. They also pump in humidity to offset static generation. Increasing humidity exacerbates energy inefficiencies, as more energy is required to cool humid air than dry air.

Controlling ESD in Data Centers

For decades, assuming that high humidity would mitigate static discharge problems, data centers have maintained relative humidity levels of 45% to 50%. In 2012, ASHRAE* TC 9.9 commissioned an independent research project to evaluate the ways environmental moisture (relative and absolute humidity) affect electrostatic charge generation and determine the humidity level necessary to avoid static damage to IT equipment in data centers.

The research was completed by faculty and graduate students at Missouri University of Science and Technology who specialize in electrostatic discharge (ESD) phenomena. Results were published by ASHRAE and presented by Atieh Talebzadehghahroudi in her PhD dissertation: Characterization of Triboelectric Charging in Data Centers/Display Panel Manufacturers and EMI Visualization Based on Energy Parcels Method In High Speed Interconnections.

The study was dedicated to “the analysis of the electrostatic charge voltage levels along the following parameters: relative humidity, absolute humidity, footwear, flooring, and type of activity.” Researchers performed tests on all types of data center floor surfaces, with people wearing a variety of shoes and walking on the floors in both predefined and random patterns.

Reasons for the ASHRAE Study

Previous data center operating guidelines called for a very narrow range of temperature and humidity control, largely due to anecdotal evidence suggesting that moderate to high Rh lowers static electricity generation and accumulation. Controlling humidity results in a massive consumption of electricity to maintain what amounts to a narrow window of temperature and environmental moisture. The authors of the study believed that broadening or eliminating humidity controls could result in a major savings of electricity and money. 

Findings

Researchers tested for electrostatic discharge at different temperatures and varied Rh levels:

Ms. Talebzadehghahroudi writes in her dissertation that: decreasing temperature at a fixed RH can increase static generation voltage. “Decreasing the RH at a fixed temperature also leads to an increase in event voltage.” She says further: “ESD shoes/floors will not only reduce the voltages strongly, but also lead to very rapid and controlled discharge times…”

D.E. Swenson, in his study, Flooring and Footwear: Charge Generation in Combination With A Person As Influenced By Environmental Moisture, notes:… while moisture in the environment has an impact and effect on the charging process and resulting accumulation of voltage on a test subject, there is little merit in using environmental moisture (absolute and relative humidity) to control static electricity without a controlled flooring and footwear system.” 

In other words, ESD flooring and static-protective footwear is better than humidity controls at protecting the powerful electronics inside a data center against static electricity.

What does all of this mean?

It means that inhibiting static in data centers requires an effective ESD-protective flooring-footwear system. Humidity alone – without ESD flooring and footwear – cannot adequately control static charges.

  • The results also showed that charge does not only build up during walking: critical voltage levels can be reached simply by standing up from a non-ESD certified chair, or by removing and dropping a sweater.
  • “The high voltages created by removing and dropping a sweater and by standing up from a chair indicate that these types of user activities might pose a higher risk of generating voltages greater than 6 kV much larger than the walking activities.” Atieh Talebzadehghahroudi

Improved Energy Efficiencies

ASHRAE’s current data center environmental specifications support what the energy efficiency community has advocated for years: following proper static-control protocols, data centers are tolerant to a wide range of temperature and humidity. With static-control protocols in place, ASHRAE allows even class A1 data centers, recommended for the tightest control, large swings in temperature and relative humidity.

According to ASHRAE’s committee 9.9 for mission-critical facilities, with an ESD mitigation system in place, a class A1 data center can range in temperature from 59°F to 89.6°F and in relative humidity from 20% to 80%.

This reduction in relative humidity saves energy at the humidifier as well as the cooling coil. And reducing the dewpoint of the space below the supply air temperature can eliminate the latent load at the cooling coils, saving significant energy in cooling as well as humidification.

ESD-control Protocols Cost Less Than Controlling Humidity

Due to the enormous energy savings, installing an ESD floor also costs less than increasing relative humidity. Using an ESD floor with static-control footwear, data centers can withstand increased temperature and decreased Rh. By following industry-standard data center facility design and operating practices – which includes outfitting the data center with an ESD floor and mandating the use of ESD-protective footwear – static charges have a very low probability of harming IT hardware down to the lowest level tested: 8% RH. 

Conclusions

By not vaporizing water for humidification, data centers in any climate can save energy. In cool climates, particularly those that use free cooling, data centers should no longer need to humidify at all for much of the year. Installing an ESD floor in data centers protects the powerful electronic equipment in data centers, saves money, and reduces energy consumption.

Play Video

StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.

Play Video

StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.

Flooring Products

We accept these major credit cards.

The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.

Share This

Share on twitter
Share on linkedin
Share on facebook
Share on email
Share on whatsapp

Get in Touch

East Coast: 617-923-2000
Email: [email protected]

“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”

subscribe to newsletter

Sign up for our newsletter and occasional updates.

Learning Center

Share This

Share on twitter
Share on linkedin
Share on facebook
Share on email
Share on whatsapp

Get in Touch

East Coast: 617-923-2000
Email: [email protected]

“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”

subscribe to newsletter

Sign up for our newsletter and occasional updates.

The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.

Flooring Products

We accept these major credit cards.

The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.

Share This

Share on twitter
Share on linkedin
Share on facebook
Share on email
Share on whatsapp

Get in Touch

East Coast: 617-923-2000
Email: [email protected]

“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”

subscribe to newsletter

Sign up for our newsletter and occasional updates.

Learning Center

This site is protected by copyright and trademark laws under both United States and International law. All rights reserved. © 2008-2021, StaticWorx® Grounded Solution™. Privacy Policy