cleaning Rubber Tile and Sheet Flooring

Cleaning Instructions

EclipseEC Rubber floor covering is designed to retain its appearance with a minimal amount of cleaning and provide slip resistance and exceptional wearability. Eclipse Rubber flooring never needs waxes or coatings. This eliminates the downtimes associated with the waxing/stripping/waxing cycle necessary with many other floor coverings.

General Precautions

Initial Cleaning After Installation

After finishing interior building construction, floor coverings usually require a thorough cleaning. No sealers are required for Architectural ESD Rubber tile. Initial cleaning procedures should not be performed within the first 72 hours after installation.

Procedure

  1. Totally sweep or vacuum area to be cleaned.
  2. Apply a diluted pH neutral cleaner such as StaticWorx Triboshield to the floor.
  3. Let solution act for 5-10 minutes. Important: Do not allow solution to dry.
  4. Scrub area with a single disc machine (150-300 rpm) and soft nylon brush or white pad.
  5. Remove (wet vacuum) residue.
  6. Rinse with clear water and remove.
  7. Allow floor to thoroughly dry (1-2 hours).
  8. Dry buff floor with single disc rotary buffing machine and soft nylon brush or white pad (not to exceed 300 rpm). Do not heel machine.

Regular Cleaning

Floors subject to heavier traffic will require more frequent interim care than low traffic areas.

daily cleaning

  1. Sweep with a clean broom or brush to remove dust and dirt.
  2. To remove light soils, spot clean with a neutral pH cleaner such as Triboshield cleaner.

Interim Maintenance (1-5 times a week)

  1. Sweep with a clean broom or brush to remove dust and dirt.
  2. To remove light soils, spot clean with a neutral pH cleaner such as Triboshield cleaner.

Stain Removal

Most stains can be removed with common solvents. To remove dried iodine-based spills such as Betadine, use a cleaner such as Butcher’s “Speedball 2000.” Scuffs and black heel marks can be easily removed by spot cleaning with a neutral pH cleaner such as Triboshield cleaner.

Note: Never use wax strippers or high alkaline liquids on EclipseEC Rubber or Harmony SD Rubber.

Waxes/High Shine

All StaticWorx ESD Rubber Flooring features a built in dirt repellent, which makes it unnecessary to apply wax coatings to protect the floor. Wax coatings are not recommended for antistatic flooring. StaticWorx Spray Buff may be used in high traffic areas.

More Downloads

Play Video

StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.

Play Video

StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.

Flooring Products

We accept these major credit cards.

The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.

Share This

Share on twitter
Share on linkedin
Share on facebook
Share on email
Share on whatsapp

Get in Touch

East Coast: 617-923-2000
Email: [email protected]

“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”

subscribe to newsletter

Sign up for our newsletter and occasional updates.

Learning Center

Share This

Share on twitter
Share on linkedin
Share on facebook
Share on email
Share on whatsapp

Get in Touch

East Coast: 617-923-2000
Email: [email protected]

“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”

subscribe to newsletter

Sign up for our newsletter and occasional updates.

The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.

Flooring Products

We accept these major credit cards.

The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.

Share This

Share on twitter
Share on linkedin
Share on facebook
Share on email
Share on whatsapp

Get in Touch

East Coast: 617-923-2000
Email: [email protected]

“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”

subscribe to newsletter

Sign up for our newsletter and occasional updates.

Learning Center

This site is protected by copyright and trademark laws under both United States and International law. All rights reserved. © 2008-2021, StaticWorx® Grounded Solution™. Privacy Policy