AmeriWorx® Classics ESD Solid Vinyl Tile
The AmeriWorx Collections
Information
- 10 Reasons to Install AmeriWorx SVT in Your Facility
- Compare Imperfect OFFSHORE Tile to AmeriWorx ESD Vinyl Tile
- Do You Need a Substitute for Armstrong Vinyl Tile?
- Meet Your Buy American Requirements
- Precision Milled Conductive Flooring
- StaticWorx vs Armstrong ESD Vinyl Tile
- Test Reports
- VOCs? Heavy metals? What are you breathing from your ESD flooring?
- Why Vinyl?
Cleaning and LEED information
“We chose AmeriWorx SVT for our facility’s 32,000 sq. ft. production floor because we wanted the ultra-clean white look and great aesthetics realized with vinyl flooring as well as the excellent ESD protection offered with conductive tile.”
Kim Boykin, VP of Operations, Fawn Electronics, Nashville NC
AmeriWorx ESD Solid Vinyl Tile (SVT) is 100% American made. Precision-milled in line, each tile is perfectly square and dimensionally stable, for easy installation with no ugly gaps between the seams. Installed using StatBond pressure-sensitive adhesive, AmeriWorx tile handles traffic immediately, with no downtime for setting or drying.
Because we sell AmeriWorx SVT direct to the contractor – with no multi-tiered distribution – there’s no extra markup, making AmeriWorx ESD vinyl tile competitively priced.
AmeriWorx ESD tile meets all parameters of ANSI/ESD S20.20 for static-control – and both ESD and material performance are guaranteed for the life of your floor.
AmeriWorx ESD Solid Vinyl Tile (SVT) is 100% American made. Precision-milled in line, each tile is perfectly square and dimensionally stable, for easy installation with no ugly gaps between the seams. Installed using StatBond pressure-sensitive adhesive, AmeriWorx tile handles traffic immediately, with no downtime for setting or drying.
Because we sell AmeriWorx SVT direct to the contractor – with no multi-tiered distribution – there’s no extra markup, making AmeriWorx ESD vinyl tile competitively priced.
AmeriWorx ESD tile meets all parameters of ANSI/ESD S20.20 for static-control – and both ESD and material performance are guaranteed for the life of your floor.
Key Benefits
- 100% Made in the U.S.
- Precision milled
- Seamless
- Durable
- Handles extreme heavy loads
- Scratch resistant
- No shrinkage
- Well priced, manufacturer’s direct
- Clean, hospital-like shine
- Easy to maintain
- No ESD wax, polish or finishes
- Zero measurable VOCs
- FloorScore certified
- Meets CA 1350/ Indoor Air Quality
- Permanent ESD protection
- No downtime after installation
- 100% Made in the U.S.
- Precision milled
- Seamless
- Durable
- Handles extreme heavy loads
- Scratch resistant
- No shrinkage
- Well priced, manufacturer’s direct
- Clean, hospital-like shine
- Easy to maintain
- No ESD wax, polish or finishes
- Zero measurable VOCs
- FloorScore certified
- Meets CA 1350/ Indoor Air Quality
- Permanent ESD protection
- No downtime after installation
Styles
Precision milled 12” x 12” standard
Available to custom order in 24” x 24” and 36” x 36”
Pairing the best ESD flooring to accommodate varied applications
Precision Milled
All AmeriWorx tiles can be installed with StatBond pressure sensitive adhesive, eliminating problems associated with wet-set graphite and carbon-loaded adhesives. For cleaner, faster installation. (Can be steam-welded if desired.)
AmeriWorx Classics ESD Vinyl Tile
Lifetime warranty. No heavy metals. Precision milled processing for perfectly square tiles—enabling fast, gap-free installations. Color runs the full thickness of tile. Handles heavy loads—2500 psi. No wax required.
AmeriWorx Rox ESD Vinyl Tile
Meets all the same parameters as our regular AmeriWorx vinyl tile in styles and colors inspired by nature.
Specifications and Information
| Composition | Precision milled vinyl tile of high density resin with a conductive carbon matrix. Pre-consumer recycled content > 10%. |
| Electrical Performance | Lifetime Warranty |
| Free from defects in workmanship and materials | Lifetime Warranty |
| Sizes | 12” x 12” (24” x 24”, 36″ x 36″ available as custom sizes) |
| Maintenance | No wax |
| Adhesive and Spread Rate | Covers approx. 180 – 220 sq. ft/gal |
| Gauge | 3.0 mm |
| Grounding Material (Supplied with order) | One 2”x 24” copper strip installed every 1,000 ft |
| Trowel Sizes | 1.6 x 1.6 mm (1/16”x 1/16”) Square Notch with 1.6 mm (1/16”) Flats |
| Category | Test Method | Results |
|---|---|---|
| Critical Radiant flux CRF (W/cm2) | ASTM E-648 | > 1.0 W/cm2 |
| Chemical Resistance | ASTM F-925 | Excellent (Acids, Alkalis, Household Chemicals) |
| Electrical Resistance | ASTM F-150 | Point to Point & Point to Ground: 50,000 – 1,000,000 ohms Dissipative: 1,000,000 – < 1,000,000,000 ohms |
| Electrostatic Propensity | AATCC-134 | <12 volts |
| Fire Resistance (Steiner Tunnel) | ASTM E-84 | < 75 (Class 1) |
| Electrically Conductive Floor Coverings | ANSI/UL 779 | Meets UL Standard |
| Floor Materials – Resistive Characterization of Materials | ANSI/ESD.S7.1 Conductive: <1.0 x 10E6 Dissipative: ≥ 1.0 x 10E6 and < 1.0 x 10E9 | Surpasses recommended standards of ANSI/ESD S20.20 |
| Floor Materials and Footwear- Resistance Measurement in Combination with a Person | ANSI/ESD STM97.1 < 3.5 X 10E7 | Surpasses recommended standards of ANSI/ESD S20.20 |
| Floor Materials and Footwear- Voltage Measurement in Combination with a Person | ANSI/ESD STM97.2 <25 volts with conductive footwear | Surpasses recommended standards of ANSI/ESD S20.20 |
| Life Safety Code | NFPA 101 | Passes |
| Smoke Density | ASTM E-662 | ≤ 450 |
| Solid Vinyl Floor Covering Materials | ASTM F-1700 | Conforms |
| Standard for Health Care Facilities | NFPA 99 | Passes |
| Static Decay, Method 4046 at 15% RH | ASTM F-101C | 5000 – 0 Volts in <0.01 sec. |
| Static Load | ASTM F-970 | < 0.001" RI @ 250 psi (1.125″ diameter foot) 0.005″ RI @ 2,500 psi (0.5″ diameter foot) |
Environmentally Friendly
FloorScore Certified
FloorScore certified, AmeriWorx vinyl tile contains no measurable VOCs, and meets California 1350 indoor air quality certification.
Info and Brochures
We’re often asked if precision milling really is necessary. If aesthetics are important, if your project requires a clean, tight, gap-free installation—then the answer is yes. Find out why.
StaticWorx developed StatBond pressure-sensitive permanent adhesive to replace wet set adhesives. StatBond eliminates messy installations. Unlike wet-set epoxies and conductive one-part acrylic emulsions, StatBond is allowed to dry completely before tiles are installed.
Learn more about StatBond and the benefits of using this pressure-sensitive permanent adhesive.
We’re often asked if precision milling really is necessary. If aesthetics are important, if your project requires a clean, tight, gap-free installation—then the answer is yes. Find out why.
StaticWorx developed StatBond pressure-sensitive permanent adhesive to replace wet set adhesives. StatBond eliminates messy installations. Unlike wet-set epoxies and conductive one-part acrylic emulsions, StatBond is allowed to dry completely before tiles are installed.
Learn more about StatBond and the benefits of using this pressure-sensitive permanent adhesive.
Further Reading
- Learn the difference between static dissipative flooring tile and conductive flooring tile
- Analysis used found no VOC or REL emissions in AmeriWorx ESD Vinyl Tile
- Learn more about VOCs
- Buy American products can be found here
- Static-control Flooring Comparison Guide with Flow Chart
- Static-control Flooring Information for Architects
- Compare Static Charge Generated While Walking
StaticWorx does not sell through multi-tier flooring distributors so your contractor will always pay the lowest possible material cost in the market.
Get in Touch
The form below will help us better understand your needs and get you as quickly as possible to the right person. We look forward to helping you solve your static problem!
You can expect a response within 24 hours. For faster service, please give us a call: 617-923-2000
Visit our privacy policy to find out how we process data.
StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.
Flooring Products
We accept these major credit cards.
Get in Touch
East Coast: 617-923-2000
Email: [email protected]
“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”
Unless otherwise stated, standards referenced are the most up-to-date versions.
Share This
subscribe to newsletter
Sign up for our newsletter and occasional updates.
The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.
Flooring Products
We accept these major credit cards.
“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”
Share This
Get in Touch
East Coast: 617-923-2000
Email: [email protected]
subscribe to newsletter
Sign up for our newsletter and occasional updates.
The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.
Unless otherwise stated, standards referenced are the most up-to-date versions.
Flooring Products
We accept these major credit cards.
Get in Touch
East Coast: 617-923-2000
Email: [email protected]
“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”
Share This
subscribe to newsletter
Sign up for our newsletter and occasional updates.
The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.
Unless otherwise stated, standards referenced are the most up-to-date versions.
This site is protected by copyright and trademark laws under both United States and International law.
All rights reserved.
© 2008-2024, StaticWorx® GroundSafe® ESD Flooring. Privacy Policy