StaticWorx RESTORE Cleaning Process

Engineered specifically for ESD solid vinyl tile (SVT)

Render ESD vinyl tile to like-new condition

In typical EMS environments, the floor takes a lot of abuse. Cart and foot traffic incrementally dull the floor causing dirt and contaminants to become embedded in the tile. Over time, unless you have a well-designed and effectively implemented preventive maintenance program, the hospital shine that attracted you to the floor in the first place fades away and the floor looks soiled and worn.

Never mind that a dingy floor shows poorly and makes a less-than-optimal first impression on visitors and potential clients. Built-up dirt and contaminants insulate electrically conductive components from shoe soles. This means, the ESD floor can no longer drain static from shoe soles as people walk across its surface – and therefore cannot protect electronics from random electrostatic discharge.

To address these problems, many facilities resort to using ESD wax, while installing a different type of floor in new areas.

The Problem with ESD Wax

ESD waxes are not conductive. They are static dissipative and provide only topical ESD properties. Over time, their static dissipative properties wear off – without a stringent process to ensure regular resistance testing, it’s impossible to know if the floor is working to protect your equipment. Using ESD wax means a lifelong relationship with the never-ending cycle of wax, test, fail test, strip and rewax.

RESTORE Before

Before you spend good money to replace or regularly wax unsightly ESD vinyl tile, try refurbishing. The StaticWorx RESTORE cleaning process, engineered specifically for use with ESD solid vinyl tile, is cost-effective and easy. And it can bring ESD tiles back to clean, shiny, like-new condition – all without using wax.

Before and After

Before the RESTORE process
Before the RESTORE process
After the RESTORE process

We tested our RESTORE cleaning process on multiple tiles in different colors from various manufacturers. Differences in color/shade are due to differences in actual tiles.

 

With RESTORE, watch how quick and easy it is clean your worn vinyl floor.

Play Video
Play Video

Looking for a way to keep your new or older floor clean?

Call us today! 617-923-2000

Tile RESTORE Origin Story

Since the 1980s StaticWorx has sold millions of square feet of ESD tile. We’ve seen 40 year-old tile that looks like glass. And newer tile that looks abysmal and does little or nothing to protect electronics from static.

Not everyone has the budget to replace their ESD tile floor. And in most cases it is absolutely unnecessary. With a few tweaks to our regular SVT cleaning process and lots of testing to ensure reliability, Tile RESTORE was born.

RESTORE offers a maintenance process that’s more cost-effective than wax and far less expensive than replacing an ESD floor that still tests within the ideal resistance range.

* Not just for AmeriWorx. RESTORE works on any manufacturer’s ESD solid vinyl tile.

Component Parts

The StaticWorx Restore Program requires only three components:

Benefits

All StaticWorx maintenance products are made in the U.S

RESTORE Cleaning Products

EcoScrub ESD floor stripper/degreaser

StaticWorx EcoScrub Floor Stripper is recommended for removing static-dissipative wax and floor finishes, and will remove other non-zinc cross-linked floor finishes. This low odor formula is easy to work with and does not require rinsing.

Specially designed for use with ESD – and non ESD – vinyl tiles or roll goods.

With low levels of volatile organic compounds (VOCs) and ultra-low toxicity, our biodegradable EcoScrub stripper/degreaser exceeds nationally accepted green standards.

  • Please dispose of this product and waste generated from this product in accordance with all applicable local, state, and Federal regulations.

 

HIGH PERFORMING

  • Rinse-free formula
  • Low foaming
  • Low odor.

 

ENVIRONMENTALLY SOUND

  • No 2-Butoxyethanol
  • No environmentally toxic preservatives.
  • No alkyl phenol ethoxylate.
  • No added fragrance.
  • No added dyes.
  • No ammonia.
  • No inorganic builders.
  • Not caustic.

Ordering Information

Price

  • $70 per gallon
  • $250 per 4-gallon case

Standard Coverage: 4,000ft² per gallon

Weight: 12 lbs. per gallon

 

SAFETY DATA SHEET

Download here

DIRECTIONS

Read the entire label or instruction sheet before using this product.

Recommended for removing static-dissipative floor wax.

  1. Dilute (1:4) 32 oz./gal. or 250 mL/L with cold water.
  2. Apply solution liberally with mop.
  3. Allow 4 – 5 minutes contact time. Be sure to keep surface wet at all times. Agitate with a low-speed rotary machine or automatic scrubber (using a stripping pad or brushes).
  4. Pick up solution using a wet vacuum or automatic scrubber and rinse thoroughly.
  5. Allow floor to dry completely.
  6. Please dispose of this product and waste generated from this product in accordance with all applicable local, state, and Federal regulations.

SPECIFICATIONS

Color …………………………………………. Water White

Fragrance …………………………………. Mild
pH concentrate ………………………..10.5

pH at dilution ……………………………10.0

Shelf Life ………………………………….. 1 year

Residue at evaporation …………. None

 

PRECAUTIONS

Keep Out of Reach Of Children

StaticWorx Formula 20.20 Cleaning/Surfacing Emulsion

StaticWorx Formula 20.20 is a tough-acting, easy-to-use conductive floor cleaner, recommended for tile restoration as well as routine or quarterly cleaning of vinyl tile and all vinyl flooring surfaces. After initial maintenance, reapplication of Formula 20.20 does not require stripping the floor. Simply wash and buff.

Less expensive than ESD finishes or wax, Formula 20.20 provides a shiny, hassle-free finish that seals without affecting the electrical performance of the floor. This means there is no need for constant monitoring or testing the conductivity or static-generating capacities of the ESD surface. Used with StaticWorx Initial Surface Cleaning Pad (natural in color, with black strands), Formula 20.20 micro-cleans the surface of the tile resulting in a clean, high-performance, hospital-like shine. Note: For its initial application, Formula 20.20 should be used only after stripping/degreasing the floor. 

HIGH PERFORMING

  • Economical
  • High activity cleaner
  • Micro cleans & conditions
  • Chemically seals tile
  • Simple to use
  • Conductive

 

ENVIRONMENTALLY SOUND

  • Biodegradable
  • Safe for the environment

Ordering Information

Price

  • $50 per quart
  • $480 per 12-qt case

Standard Coverage: 800-1,000ft² per quart (w/double application)

Weight: 2.5 lbs. per quart

 

SAFETY DATA SHEET

Download here

DIRECTIONS

  1. For initial maintenance scrubbing or strip the floor, using StaticWorx EcoScrub floor stripper.
  2. Place a StaticWorx cleaning pad (natural in color, with black strands) onto a low-speed floor machine.
  3. Using the mist setting on a trigger sprayer, mist Staticworx Formula 20.20 over the area to be cleaned.
  4. With the low speed machine, distribute the cleaner evenly over the area to be surface cleaned (about a 10’x10’ area at a time) – then begin buffing action.
  5. Buff the area using an even back and forth motion. Approximately 5 passes per row should properly clean the surface, but take extra passes to assure complete surface uniformity.
  6. Continue the process until the surface of the entire area has been cleaned and is visually acceptable.
  7. Repeating the process a second time will maximize cleaning and appearance, if desired.

Note: Never buff in excess of 375 RPM.

SPECIFICATIONS

Color                          Water White
Fragrance                Mild
pH                               11.0

ESD Scrub Pads
  • ESD Initial Scrub Pad, for new, lightly soiled tile, for use with EcoScrub
  • ESD Deep Scrub Pad, for EcoScrub degreaser application and heavily soiled areas
  • ESD Natural Fiber Pad, for Formula 20.20 emulsion application

ESD Initial Scrub Pad 

Designed for EcoScrub degreaser application and for use on new or lightly soiled tile.

Price
  • $20 each
  • $160 per case (10 ct.)
Standard Coverage: 1,500ft² (750ft² per side)

17” – part #5580
20” – part #5581

Weight: 2 lbs. per case
ESD Deep Scrub Pad 

Designed for EcoScrub degreaser application, heavily soiled tile or floor restoration.

Price
  • $25 each
  • $200 per case (10 ct.)
  Standard Coverage: 1,500ft² (750ft² per side)

17” – part #5582
20” – part #5583

Weight: 2 lbs. per case
ESD Natural Fiber Pad 

Specifically designed for use with Formula 20.20 emulsion application.

Price
  • $19 each
  • $75 per case (5 ct.)
Standard Coverage: 5,000ft² (2,500ft² per side)

17” – part #5584
20” – part #5585

Weight: 2 lbs. per case

EcoScrub ESD floor stripper/degreaser

StaticWorx EcoScrub Floor Stripper is recommended for removing static-dissipative wax and floor finishes, and will remove other non-zinc cross-linked floor finishes. This low odor formula is easy to work with and does not require rinsing.

Specially designed for use with ESD – and non ESD – vinyl tiles or roll goods.

With low levels of volatile organic compounds (VOCs) and ultra-low toxicity, our biodegradable EcoScrub stripper/degreaser exceeds nationally accepted green standards.

  • Please dispose of this product and waste generated from this product in accordance with all applicable local, state, and Federal regulations.

 

HIGH PERFORMING

  • Rinse-free formula
  • Low foaming
  • Low odor.

ENVIRONMENTALLY SOUND

  • No 2-Butoxyethanol
  • No environmentally toxic preservatives.
  • No alkyl phenol ethoxylate.
  • No added fragrance.
  • No added dyes.
  • No ammonia.
  • No inorganic builders.
  • Not caustic.

Ordering Information

Price

  • $70 per gallon
  • $250 per 4-gallon case

Standard Coverage: 4,000ft² per gallon

Weight: 12 lbs. per gallon

SAFETY DATA SHEET

Download here

DIRECTIONS

Read the entire label or instruction sheet before using this product.

Recommended for removing static-dissipative floor wax.

  1. Dilute (1:4) 32 oz./gal. or 250 mL/L with cold water.
  2. Apply solution liberally with mop.
  3. Allow 4 – 5 minutes contact time. Be sure to keep surface wet at all times. Agitate with a low-speed rotary machine or automatic scrubber (using a stripping pad or brushes).
  4. Pick up solution using a wet vacuum or automatic scrubber and rinse thoroughly.
  5. Allow floor to dry completely.
  6. Please dispose of this product and waste generated from this product in accordance with all applicable local, state, and Federal regulations.

SPECIFICATIONS

Color …………………………………………. Water White

Fragrance …………………………………. Mild

pH concentrate ………………………..10.5

pH at dilution ……………………………10.0

Shelf Life ………………………………….. 1 year

Residue at evaporation …………. None

PRECAUTIONS

Keep Out of Reach Of Children

StaticWorx Formula 20.20 Cleaning/Surfacing Emulsion

StaticWorx Formula 20.20 is a tough-acting, easy-to-use conductive floor cleaner, recommended for tile restoration as well as routine or quarterly cleaning of vinyl tile and all vinyl flooring surfaces. After initial maintenance, reapplication of Formula 20.20 does not require stripping the floor. Simply wash and buff.

Less expensive than ESD finishes or wax, Formula 20.20 provides a shiny, hassle-free finish that seals without affecting the electrical performance of the floor. This means there is no need for constant monitoring or testing the conductivity or static-generating capacities of the ESD surface.

Used with StaticWorx Initial Surface Cleaning Pad (natural in color, with black strands), Formula 20.20 micro-cleans the surface of the tile resulting in a clean, high-performance, hospital-like shine.

Note: For its initial application, Formula 20.20 should be used only after stripping/degreasing the floor. 

 

HIGH PERFORMING

  • Economical
  • High activity cleaner
  • Micro cleans & conditions
  • Chemically seals tile
  • Simple to use
  • Conductive

ENVIRONMENTALLY SOUND

  • Biodegradable
  • Safe for the environment

Ordering Information

Price

  • $50 per quart
  • $480 per 12-qt case

Standard Coverage: 800-1,000ft² per quart (w/double application)

Weight: 2.5 lbs. per quart

SAFETY DATA SHEET

Download here

DIRECTIONS

  1. For initial maintenance scrubbing or strip the floor, using StaticWorx EcoScrub floor stripper.
  2. Place a StaticWorx cleaning pad (natural in color, with black strands) onto a low-speed floor machine.
  3. Using the mist setting on a trigger sprayer, mist StaticWorx Formula 20.20 over the area to be cleaned.
  4. With the low speed machine, distribute the cleaner evenly over the area to be surface cleaned (about a 10’x10’ area at a time) – then begin buffing action.
  5. Buff the area using an even back and forth motion. Approximately 5 passes per row should properly clean the surface, but take extra passes to assure complete surface uniformity.
  6. Continue the process until the surface of the entire area has been cleaned and is visually acceptable.
  7. Repeating the process a second time will maximize cleaning and appearance, if desired.

Note: Never buff in excess of 375 RPM.

SPECIFICATIONS

Color                          Water White

Fragrance                Mild

pH                               11.0

ESD Scrub Pads
  • ESD Initial Scrub Pad, for new, lightly soiled tile, for use with EcoScrub
  • ESD Deep Scrub Pad, for EcoScrub degreaser application and heavily soiled areas
  • ESD Natural Fiber Pad, for Formula 20.20 emulsion application

ESD Initial Scrub Pad 

Designed for EcoScrub degreaser application and for use on new or lightly soiled tile.

Price
  • $20 each
  • $160 per case (10 ct.)
Standard Coverage: 1,500ft² (750ft² per side)

17” – part #5580
20” – part #5581

Weight: 2 lbs. per case

ESD Deep Scrub Pad 

Designed for EcoScrub degreaser application, heavily soiled tile or floor restoration.

Price
  • $25 each
  • $200 per case (10 ct.)
Standard Coverage: 1,500ft² (750ft² per side)

17” – part #5582
20” – part #5583

Weight: 2 lbs. per case

ESD Natural Fiber Pad 

Specifically designed for use with Formula 20.20 emulsion application.

Price
  • $19 each
  • $75 per case (5 ct.)
Standard Coverage: 5,000ft² (2,500ft² per side)

17” – part #5584
20” – part #5585

Weight: 2 lbs. per case

Looking for a way to keep your new or older floor clean?

Try StaticWorx Cleaning Products

Allowing dirt and contaminants to build on your ESD floor can prevent shoe soles from making contact with conductive veins or chips – turning even conductive tile insulative. And, with some floors, the routine use of certain cleaners or waxes can void your warranty.

An ESD floor is – or should be – a long-term investment. At StaticWorx, we understand the value of your floor and also know how important it is that your ESD floor protects your electronic components 24/7 to its fullest capacity.

Our tough, environmentally-sound maintenance products will keep your floor shiny and clean – and never compromise the ESD performance of your floor.

With our complete ESD tile cleaning program, you can rest assured that – if you maintain your floor regularly and follow our proven procedures – your solid vinyl tile will maintain its clean, hospital-like shine for years to come.

Call now to learn more about StaticWorx cleaning supplies and RESTORE cleaning program: 617-923-2000

All StaticWorx maintenance products are made in the U.S.

StaticWorx ESD Vinyl Tile Flooring

AmeriWorx ESD Solid Vinyl Tile

Play Video

StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.