Smaller Electronic Devices Create Growing ESD Problems for 9-1-1 Call Centers and Other Mission-Critical Environments
Latest Research Shows that Need Increases for Fault-Tolerant, Anti-Static Flooring
Please note that information in this article may no longer be current. This archive is provided for reference purposes only and information should not be taken as current and up to date. Please see the ESD Standards page and Guide to ESD Flooring Selection for up-to-date information.
By Dave Long, President & CEO, StaticWorx
ESD (electrostatic discharge) has long been known as an “invisible and silent threat,” but it is now generating a bit of a stir at data centers, emergency call centers, and other mission-critical environments. The reason for this heightened attention is a dramatic new study from NanoMarkets, which shows that smaller electronic components are creating much greater risks for electronic hardware manufacturers and many end users.
According to NanoMarkets, a leading analyst in the electronics industry, as electronic parts become faster and more powerful, circuits have become much smaller, decreasing from micron-sized to nano-sized. The continued miniaturization of PCBs and hard drives, coupled with even smaller devices on computer chips, reduces the room available for on-chip static protection. As a result, billions of dollars are at risk if factories and end users of electronic equipment don’t create static-safe environments with fault-tolerant, static-control flooring.
The report asserts that the increased vulnerability of electronics, including networked computers and servers, has significantly increased the demand for better ESD control in the semiconductor industry, with sales of ESD products expected to exceed $8 billion by 2015.
We in the ESD industry have been following this miniaturization trend for years, but the magnitude of the problem has been slow to register in the field. Now, we’re hoping that this report will not only reinforce what we’ve been saying but that its findings will resonate with corporate decision makers who have the opportunity to justify static-safe worksites and to save considerably at the same time.
In response to the report, ESD consultants concur that this trend has particular implications for flooring applications that need to be fault-tolerant (with guaranteed ESD protection) in environments like data centers and 911 dispatch centers. We applaud efforts such as the ESDA Roadmap, which has proactively warned users of electronics of impending ESD problems due to the “scaling” of semiconductor devices.
Static in Mission-Critical Settings
Controlling static in real-world, mission-critical environments can be trickier than eliminating static in the controlled environments that produce servers, mainframe computers, and memory storage equipment. These settings lack static-control protocols like special static dissipative shoes and shoe sole testers, employee grounding programs, and ESD training. Without static-control footwear, most static-control flooring generates static on people as they walk across the floor.
Independent testing has shown that most ESD flooring—including conductive vinyl, static dissipative SDT, anti-static, high-pressure laminate (HPL), and all types of epoxy coatings—generates significant static when people wear standard footwear. This phenomenon has accentuated the need for fault-tolerant flooring solutions. For instance, based on testing at Fowler Labs, electrically conductive, fault-tolerant rubber mitigates static charges regardless of the footwear. This is good news for data centers, 911 call centers, flight control towers, R&D labs, and control rooms, where special footwear isn’t a reasonable option.
A Perfect Storm
What we have witnessed for the last 40 years is the brewing of a perfect ESD storm that follows the thesis of Moore’s Law, which maintains that the number of transistors in integrated circuits doubles every two years. We believe that the continuation of Moore’s Law is inevitable, and this will intensify today’s ESD problem, producing potentially devastating consequences to the semi-conductor industry and mission-critical environments.
The fact is that electronic devices, once capable of withstanding several hundred volts of static electricity discharge, can no longer handle 50 volts or more. So it takes much less than ever before to zap telephony devices, fry microprocessors, and knock out networked systems.
Without the correct anti-static flooring in place, manufacturers of data center equipment risk significant damage and lost revenue due to latent ESD events. Latent damage causes partial product degradation at the factory level and accounts for end-user malfunctions such as data corruption and missed signals, product failure, product returns, downtime, and expensive warranty claims. How pervasive is this situation? Product losses among end users average 27% to 33%.*
Faulty Specs, Costly Errors
Of particular concern are the numbers of floors in multiple environments that are installed with the wrong specs and that don’t meet accepted international ESD standards, according to Ted Dangelmayer, CEO, Dangelmayer Associates, a leading analyst in the ESD industry. Among recent studies by Dangelmayer is one citing that circuit boards and systems may now be more vulnerable to ESD than the microelectronic components comprising them.
“There is a growing need for fault-tolerant products that provide Class-0 ESD protection in electronics manufacturing,” says Dangelmayer. “It is important for a floor to inhibit static charge generation as well as it can remove static from charged bodies.”
According to Dangelmayer, StaticWorx’s Eclipse Rubber, as recognized by MIT Lincoln Laboratory and ESD Journal, is the only static control, resilient flooring material that provides Class-0, fault-tolerant protection by inhibiting static generation on people wearing any type of footwear. “This is critical because it is unrealistic to expect employees in real-world environments to wear special, static-protected shoes,” he says.
Designers of data centers, call centers, and other mission-critical operations are pursuing fault-tolerant ESD flooring solutions that include lifetime warranty, long-term durability, easy maintenance, and green product attributes. StaticWorx Eclipse conductive and static dissipative rubber addresses these needs whether installed over bare concrete or laminated to raised access flooring panels.
The Need for Due Diligence
Well before the release of the NanoMarkets’ report, we at Staticworx have been concerned about the lack of reliable ESD knowledge in the marketplace. In particular, we have observed a serious disconnect among the major players involved in the ESD flooring equation: manufacturers, distributors, architects, subcontractors, and facility managers. Unfortunately, these parties typically don’t speak the same language. Miscommunication leads to misdiagnosis, and misdiagnosis leads to costly problems that are often aren’t discovered until it’s too late.
Most ESD problems aren’t controlled through product design; they are mitigated at the facility construction level. The best way to avoid needless facility investments and future headaches is to perform due diligence, get sound technical advice, and make the right flooring choice, whether you’re considering new construction or renovations.
In the future, in the name of progress, electronic components will no doubt continue to become faster and more robust. But that comes at a price, since they will necessarily become even smaller as well, thus further compromising the precious real estate available for ESD protection on circuit boards and chips.
In this regard, it’s important to consider the cost of inaction or continued wrong choices. This is even more paramount during this time of continued economic uncertainty, when companies need to contain expenses and also make sure that critical capital covers today’s and tomorrow’s needs.
Again, the solution starts with education. Indeed, it’s time for all of us in the industry to study the facts, bring this insidious threat to light, and take measures to eliminate the risk of ESD.
To view excerpts of NanoMarket’s report, ESD Products and Materials: Markets and Opportunities, visit www.nanomarkets.net.
For more about the ESD Association, visit www.esda.org.
*Stephen Halperin, “Guidelines for Static Control”
Dave Long is president & CEO of StaticWorx, Inc. Named to the Inc. 500/5000, StaticWorx, is North America’s largest manufacturer of electrostatic discharge (ESD) flooring products that protect work sites with customized, static-free solutions. StaticWorx has warehouses on both coasts and is factory-direct. The company has won many industry accolades and has served thousands of customers with experience that spans 30-plus years.
StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.
