StatBond™ Pressure-Sensitive (PS) Conductive Adhesive
StatBond Pressure-Sensitive adhesive enables the most efficient and cost-effective ESD installation labor in the industry.
StatBond PS conductive pressure-sensitive adhesive – the latest entry in our line of high-performance conductive adhesives – was developed to fill a void in the ESD flooring industry. Traditionally, wet-set carbon black and dark graphite adhesives have been used to install vinyl and rubber tiles. Wet-set adhesives are troweled on the floor and the tile placed while the adhesive is wet, resulting in slow, messy installations.
When the floor is rolled, these dark wet-adhesives often seep through the seams. To contain the mess, the installer must clean the tiles with solvents and mineral spirits before the adhesive has dried. Once the adhesive has dried, it’s very difficult to remove and can stain the tiles.
StatBond PS can be spread over a large area and allowed to dry before tiles are installed. Because it’s dry, there’s no chance of the adhesive oozing into seams when the floor is rolled. This means no mess, a much faster installation, and quick, easy cleanup.
StatBond PS conductive pressure-sensitive adhesive – the latest entry in our line of high-performance conductive adhesives – was developed to fill a void in the ESD flooring industry. Traditionally, wet-set carbon black and dark graphite adhesives have been used to install vinyl and rubber tiles. Wet-set adhesives are troweled on the floor and the tile placed while the adhesive is wet, resulting in slow, messy installations.
When the floor is rolled, these dark wet-adhesives often seep through the seams. To contain the mess, the installer must clean the tiles with solvents and mineral spirits before the adhesive has dried. Once the adhesive has dried, it’s very difficult to remove and can stain the tiles.
StatBond PS can be spread over a large area and allowed to dry before tiles are installed. Because it’s dry, there’s no chance of the adhesive oozing into seams when the floor is rolled. This means no mess, a much faster installation, and quick, easy cleanup.
Tighter Installation
Working on a dry pressure-sensitive adhesive enables the installer to employ the pyramid/step installation method for large areas. This method reduces the possibility of variance and cutbacks common to jobs where the tile was installed in rows. It also helps prevent gaps because the geometry of fitting tiles into a pyramid (instead of linear rows) forces the tiles to fit together tightly.
A gap-free installation yields a cleaner facility – because there are no seams to trap dirt and other contaminates.
Installing ESD vinyl with StatBond Pressure-Sensitive Adhesive
Stands Up to Heavy Traffic
StatBond creates a firm bond line that stands up to heavy traffic and telegraphing. StatBond can be used on porous and non-porous surfaces that have been properly prepared – such as concrete, old VCT underlayment grade plywood, cementitious patching compounds, epoxy, laminate floors and raised access panels. StatBond allows immediate traffic after tile placement. and levelers.
Key Benefits
- Triple the shear strength of releasable adhesives
- Can be applied over all types of surfaces including old flooring
- No adhesive seepage when the floor is rolled
- Installers can stand and kneel on tiles while installing
- Ideal for installations in occupied spaces
- Anti-microbial
- Can be used over old floors
- Instant bond
- Allows immediate traffic
- Highly conductive
- Permanent conductivity
- Floorscore low VOC
- Easy to install
- Easy clean up
- Ideal for rapid installation
Environmental Impact
- VOC content of <0.1 lbs / gallon
- Complies with the South Coast Air Quality Management District (SCAQMD) Rule 1168 Standard for Rubber Floor Adhesives, which has a VOC limit of 60
- Contributes toward satisfying LEED Credit 4.1: Low Emitting Materials, Adhesives & Sealants
- FloorScore®
Indoor Air Quality Certified to SCS-EC10.3-2014 v3.0
Conforms to the CDPH/EHLB Standard Method v1.1-2010 (effective January 1, 2012) for the school classroom, private office, and single-family residence parameters when modeled as Flooring. Also, conforms to the SCAQMD Rule 1168 – Adhesive and Sealants (January 2005); Hong Kong Air Pollution Control (VOC) Regulation.
Indoor Air Quality Certified to SCS-EC10.3-2014 v3.0
Conforms to the CDPH/EHLB Standard Method v1.1-2010 (effective January 1, 2012) for the school classroom, private office, and single-family residence parameters when modeled as Flooring. Also, conforms to the SCAQMD Rule 1168 – Adhesive and Sealants (January 2005); Hong Kong Air Pollution Control (VOC) Regulation.
Note: GroundTack Releasable Adhesive is made for use with ShadowFX ESD Carpet tile.
Available in 1- and 4-gallon pails.
Get in Touch
The form below will help us better understand your needs and get you as quickly as possible to the right person. We look forward to helping you solve your static problem!
You can expect a response within 24 hours. For faster service, please give us a call: 617-923-2000
"*" indicates required fields
Visit our privacy policy to find out how we process data.
StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.