StatLock Interlocking Static Dissipative (SD) Rubber Tiles
the green choice
Our StatLock interlocking SD rubber tiles, made from 100% recycled and up to 91% post-consumer rubber, are our greenest ESD floor tile to date. Durable enough for heavy-duty environments, StatLock interlocking rubber, with inherent static-control characteristics, is an excellent choice for temporary or transitional spaces. No need to rely on your landlord to take care of your ESD flooring needs. Simply carry the static-dissipative tiles to your location, zip together quickly and efficiently, then unlock and carry out when you’re finished. Best of all StatLock interlocking ESD rubber provides long wear and exceptional value for people searching for a low cost, high performance static-safe floor.
Ideal for Installing Over Problem Floors
Like our signature GroundLock interlocking tile, StatLock SD rubber tiles provide an ideal solution for problem floors. At 8mm thick, StatLock SD rubber tiles can be installed right over ugly subfloors or high-moisture concrete, without telegraphing imperfections or worrying about moisture seeping through seams.
Easy Installation and Lift & Carry Removal Makes Moving Tiles a Breeze
Need a floor for a temporary space? With StatLock rubber tiles, moving in and out is a breeze. The thick, lay-flat rubber tiles are so easy to install that a child could do it. Simply place the tile, set another adjacent tile, snap together and lock into place. When you’re ready to move, lift to unzip the tiles and carry to the next installation.
Seamless
Our StatLock SD rubber tiles are engineered so precisely that the interlocking pattern nearly disappears as tiles are installed, creating the appearance of a clean, monolithic surface.
Rugged & Durable
StatLock SD rubber tiles are custom-formulated, with high strength polyurethane binders, combined with recycled tire crumb, producing a rugged, extremely durable floor – perfect for installation in warehouses with forklifts and pallet jacks and other heavy-duty work areas.
Eco-friendly
StatLock SD rubber tiles are made from 100% recycled rubber with a specially engineered polymer binder. Because of the high level of recycled material, StatLock SD rubber tiles meet and exceed requirements set forth in the U.S. Executive Order 13101, Greening the Government and can be a contributing factor for LEED Green Building Council certification.
Inherent static-control properties, meets ANSI/ESD S20.20
StatLock SD rubber tiles measure > 1.0 x 10E6 and < 1.0 x 10E9, meeting ESD S20.20 parameters for static dissipative materials. With inherent static-control properties, StatLock SD tiles will never lose their dissipative characteristics nor ever lose resistance and become conductive – whether tested alone or as part of a system. So you’ll always know that the floor you qualified and chose was the floor you’ll have for the longhaul.
Key Benefits
- Eco-friendly
- Easy to install
- Perfect for temporary spaces
- Ideal solution for problem floors
- Durable
- Suitable for heavy-duty applications
- Easy to clean
- American made
- Ergonomic/comfortably cushioned
- Eco-friendly
- Easy to install
- Perfect for temporary spaces
- Ideal solution for problem floors
- Durable
- Suitable for heavy-duty applications
- Easy to clean
- American made
- Ergonomic/comfortably cushioned
Applications
- Server rooms
- Data centers
- Communications centers
- Manufacturing
- Warehouses
Test Results
| Test Type | ASTM | Result |
|---|---|---|
| Shore Hardness | D-2240 | 65 +/– 5 |
| Density | D-395 | 63-94 lbs/ft3 |
| Elongation (at break) | D-412 | 50-150% |
| Tensile Strength | D-412 | 200-400 PLS |
| Compression Set | D-395 | -15 to -45% @ 25% |
| VOC Emissions | D-5116 | 0.5 mg/m2 or less |
| Resistance To Chemicals | F-925 | No Change |
| Static Load Limit | F-970 | Passes, 150 PSI Surface |
| Flammability | D-2895 | Pass |
| Die-C Tear | D-624 | 80 min |
| Coefficient of Friction | D-1894 | 0.75-1.50 |
| Durometer | D-2240 | 60 +/- 5 Shore A |
| Tear Resistance | D-624 | 50-125 PLI * |
* Tiles contain up to 96% recycled rubber material, manufactured in the USA, and are covered by our Limited Warranty.
Information
Size and Color
Size: 24” x 24”, 8mm thick
Color: Black
Maintenance & Floor Care
Maintenance and floor care depend on the desired appearance of the installed product and the type of equipment used to maintain the flooring. Use only StaticWorx recommended cleaners, disinfectant, and neutral PH, non-petroleum products. Do not use harsh chemicals. For specific recommendations, call StaticWorx: 617-923-2000
Warranty
StatLock interlocking SD rubber tiles carry a 5-year limited warranty for defects in material and workmanship. Refer to StaticWorx for limited warranty document.
Get in Touch
The form below will help us better understand your needs and get you as quickly as possible to the right person. We look forward to helping you solve your static problem!
You can expect a response within 24 hours. For faster service, please give us a call: 617-923-2000
StaticWorx high-performance static-control floors protect electronic components, explosives, and high-speed computers from damage caused by static electricity. ESD flooring is part of a system. Choices should always be based on objective, researched evidence. When you partner with us, we look at all possible items that may need to integrate with the floor, and, focusing on your goals and objectives, help you find the right floor for your application.
Flooring Products
We accept these major credit cards.
Get in Touch
East Coast: 617-923-2000
Email: [email protected]
“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”
Share This
subscribe to newsletter
Sign up for our newsletter and occasional updates.
The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.
Flooring Products
We accept these major credit cards.
“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”
Share This
Get in Touch
East Coast: 617-923-2000
Email: [email protected]
subscribe to newsletter
Sign up for our newsletter and occasional updates.
The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.
Flooring Products
We accept these major credit cards.
Get in Touch
East Coast: 617-923-2000
Email: [email protected]
“I’m so glad we were able to find an attractive solution that didn’t leave us with some run-of-the-mill ugly disaster.”
Share This
subscribe to newsletter
Sign up for our newsletter and occasional updates.
The FAA has updated its standard for facilities and electronic equipment. StaticWorx meets all requirements for ESD flooring.
All rights reserved. © 2008-2023, StaticWorx® GroundSafe™ ESD Flooring. Privacy Policy
